Blinking Of The Tally Lamp; Warning Tone - JVC GY-HC900CHE Instructions Manual

Blinking of the Tally Lamp

The tally lamp starts blinking when the remaining space on the recording media is running out during
recording or when the battery power is running low.
Blinking Mode
Blinks slowly
(once every second)
Blinks quickly
(2 times per second)

Warning Tone

Warning tone is output from the speaker and [PHONE] terminal when the battery level is low.
0
Warning tone is also output when an error occurs in the camera recorder.
Memo :
Whether the sound is to be muted or output when it is at the minimum level can be configured in [Min.
0
ALARM Level].
(A P141 [ Min. ALARM Level ] )
242
Error Messages and Actions
Remaining Battery Power/SD Card Space
Battery power is low
0
Remaining recording time on recording media is less than 3 minutes
0
(during recording)
When a malfunction occurred during live streaming
0
Remaining battery power is almost zero
0
Remaining recording time on recording media has reached 0 minutes
0
(during recording)
Error on the camera recorder
0