Playing Back - JVC GY-HC900CHE Instructions Manual

Item
FTP Upload Uploads a clip to the FTP server.
This Clip:
0
Uploads the clip pointed by
the cursor.
Selected Clips:
0
Uploads the clips selected
(appended with check
mark).
All Clips:
0
Uploads all clips.
Delete Clips Deletes clip. However, clips with
OK mark cannot be deleted.
This Clip:
0
Deletes the clip pointed by
the cursor.
Selected Clips:
0
Deletes the clips selected
(appended with check
mark).
All Clips:
0
Deletes all clips.
Trim This Clip Trims the clip pointed by the
cursor.
Memo :
The object of action is the clip of the current slot
0
being displayed.
[Selected Clips] cannot be performed if there are
0
no selected (appended with check mark) clips.
[This Clip] cannot be performed if there are more
0
than one selected (appended with check mark)
clips.
If the write-protect switch of an SD card is set,
0
OK mark cannot be appended or deleted, and
the clips cannot be deleted and trimmed.
100
Playing Recorded Clips
Description

Playing back

Use the operation buttons on the side control panel
of the camera recorder to play back.
.
A [STATUS/SET] Button (R)
Plays back/pauses the clip pointed by the
0
cursor.
You can press the cross-shaped button (HI)
0
to perform frame-by-frame forward playback
during pause mode.
B Cross-shaped Button (JKH I)
[J/K] Button:
0
Skips in the reverse or forward direction.
[H/I] Button:
0
During Playback:
0
Fast forwards in the reverse or forward
direction.
While paused:
0
Frame-by-frame playback in the reverse
or forward direction.
C [CANCEL/RESET] Button
Stops playback.
1 In the thumbnail screen, move the cursor to
the clip to be played back.
Move the cursor to the clip to be played back
using the cross-shaped button (JKH I).
2 Press the [STATUS/SET] button (R).
Playback of the selected clip starts.
Audio Output during Playback
You can confirm the playback sound from the
0
monitor speaker, or the headphone connected
to the [PHONE] terminal. When a headphone is
connected to the [PHONE] terminal, sound
cannot be output from the monitor speaker.
(A P190 [Connecting the Headphone] )
Adjust the volume of the monitor speaker or
0
headphone using the [MONITOR] volume
adjustment knob.
C
B
A