JVC GY-HC500E Instructions Manual page 84

When [Max & Min]/[Max]/[Min] is selected
A The cursors appear according to the setting
when the button is pressed.
Green and yellow frames appear, and the
brightness levels of these areas are displayed.
.
B Hold down the button in the state in A, the
positions of the brightest (Max) and darkest
(Min) areas in the screen are automatically
detected with regard to the changes of the
object, and the brightness level of these areas
are displayed.
.
C Pressing the button in the state in B stops the
automatic position detection. The frames are
fixed at the stopped positions and the
brightness levels are displayed.
D By pressing the button, the cursors and
brightness indication disappear.
.
84
Setting Spot Meter
When [Manual] is selected
A The brightness of the cursor position is
displayed when the button is pressed.
Cursor
(Green)
Brightness
Indication
Cursor
(Yellow)
.
B By pressing the button, the cursors and
brightness indication disappear.
Cursor
(Max: Green)
.
C Hold down the button in the state in A or B, the
Brightness
cursor blinks in green.
Indication
Move the cursor with the cross-shaped button
Cursor
(JKHI) to specify the position to display the
(Min: Yellow)
brightness.
When you decide on the position, press the Set
button (R) to confirm.
.
D Frames are fixed at the stopped positions and
the brightness is displayed.
Memo :
When moving the cursor position, [Shutter]/[AE
0
Level] control is disabled.
When the brightness is 0 % in the entire screen,
0
the frame is fixed in the center.
Cursor
(Green)
Brightness
Indication
Brightness
Indication
Cursor
(Blinks in
green)