JVC GY-HC500E Instructions Manual page 168

O White Balance Mode
Displays the current white balance mode.
(*****K indicates color temperature)
A *****K : When the [WHT BAL B/A/PRESET]
switch is set to "A" in the Manual White
Balance mode.
B *****K : When the [WHT BAL B/A/PRESET]
switch is set to "B" in the Manual
White Balance mode.
P *****K : When the [WHT BAL B/A/PRESET]
switch is set to "PRESET" in the
Manual White Balance mode.
a FAW : During Full Auto White Balance
mode.
FAW : While in the Full Auto White Balance
mode, and [AE Lock] is set for "FAW"
or "AE/FAW" during lock operation.
(A P70 [Preset Mode (PRESET)] )
(A P71 [Memory A Mode (A), Memory B Mode
(B)] )
Memo :
When [Preset Paint], [AWB Paint] or [FAW
0
Paint] is set to a setting other than the default
value, a q icon is displayed to the right of the
color temperature.
P Expanded Focus/Histogram
Displayed upon pressing the user button that is
assigned with "Expanded Focus" and
"Histogram".
Memo :
Display switches in the order of "Expanded
0
Focus" > "Histogram".
Q Infrared Recording
"I" is displayed when the infrared recording is
ON.
R Face Detection
Displayed when Face Detection is ON.
: When [Face Detection] is set to
q
"ON"
: When [Face Only AF] is configured
H
to "ON" while [Face Detection] is
"ON"
S Image Stabilizer Mark
Displayed when the image stabilizer is ON.
: When [Level] of [OIS] is set to
i
"Normal".
: When [Level] of [OIS] is set to "High".
j
Memo :
When Image Stabilizer is configured to "OFF",
0
h is displayed for 3 seconds.
168
Display Screen in Camera Mode
T Focus Assist
" " is displayed when auto focus is
0
activated.
When ACCU-Focus is enabled, "ACCU
0
blinks for about 10 seconds while Focus
Assist starts up, after which the "
indicator lights up.
If recording starts while [ACCU-Focus] is
0
active, [ACCU-Focus] will be forcibly
deactivated.
(A P128 [ Focus Assist ] )
U Luminance Information
Displayed when the Spot Meter function is
activated.
MAX : Maximum luminance
MIN : Minimum luminance
V Zebra pattern
During zebra pattern display,
is displayed on the display screen in Camera
mode.
(A P82 [Setting Zebra Pattern] )
W Time Display
Displays the current time.
Memo :
The date/time display style can be configured in
0
[System] B [Date/Time].
When [System] B [Record Set] B [Time Stamp]
0
is set to "On", this item is not displayed.
X Focus Display
Displays the focus state and the approximate
distance to the subject in focus.
: Manual focus
d
: Autofocus
e
: Autofocus lock
: [AF Area]-"Wide"
C
: [AF Area]-"Multi"
D
Memo :
The displayed unit of measurement (feet or
0
meter) can be configured in [LCD/VF] B [Display
Type] B [Focus].
When focus display is grayed, Auto Focus
0
cannot function.
"
"
(zebra icon)