Adjusting The Focusing By Face Detection - JVC GY-HC500E Instructions Manual

Expanded Focus Function
You can magnify the preferred area by pressing the
[EXP.FOCUS/9] button; doing so enables precise
focus to be established easily.
* You can also use the user button assigned with
the "Expanded Focus" function instead of the
[EXP.FOCUS/9] button.
(A P46 [Assignment of Functions to User
Buttons] )
(A P116 [USER1 to USER9, USER10 ▲,
USER11 ▼, USER12 ◀, USER13 ▶] )
1 Press the [EXP.FOCUS/9] button.
The center area of the screen is enlarged for
0
the first time.
For subsequent operation of the button, the
0
area at which the operation was last
performed will be enlarged.
.
2 Use the cross-shaped button (JKH I) to
magnify the preferred area.
The portion that is being magnified is
0
displayed at the lower right corner of the
screen.
3 Press the [CANCEL] button to cancel the
setting.
Memo :
The display of the enlarged screen is dot by dot
0
equivalent.
To set the operation when the button is pressed,
0
go to [Camera Function] B [User Switch Set] B
[Expanded Focus].
(A P118 [ Expanded Focus ] )
Pressing and holding the Set button (R) resets
0
the position of magnification.
This function can be used together with the
0
Focus Assist function.
Magnifying an image does not alter the size of
0
the recorded image.
The cross-shaped button cannot be used as
0
user button while the area is being magnified.
This function is unavailable when [System] B
0
[Record Set] B [Record Format] B [System] is
set to "SD".
When the display screen is turned off, the
0
magnified area at the bottom right of the screen
will not be displayed.
62
Focus Operation
Adjusting the Focusing by
Face Detection
This function detects human faces and
automatically adjusts focus during Auto Focus.
It can also track moving objects.
When several faces are detected, you can select
one to focus on.
Memo :
This function can also adjust the brightness
0
automatically according to the brightness of the
face detected.
(A P116 [Face Detection Function Settings] )
.