JVC GY-HC500E Instructions Manual page 155

NETWORK LED
When this is configured to "On", it lights up in red
when live streaming is in progress.
The LED lights up in orange during poor streaming
connection or connection failure.
[Setting Values: ROn, Off]
STATUS LED
For configuring the STATUS LED.
REC/Pre Rec:
0
Lights up in red during recording or transition to
recording. Lights up in orange when the
remaining space on the recording media is
running low. Lights up in green when Pre Rec is
on standby.
External:
0
Lights up in red while in the Program mode when
an external device such as RM-LP100 is
connected. Lights up in green while in the
Preview mode.
Return over IP:
0
Lights up in green during Return over IP or when
IFB is in progress. Lights up in orange when an
error has occurred.
Off:
0
Does not light up.
[Setting Values: RREC/Pre Rec, External, Return
over IP, Off]
LED Bright
For specifying the brightness of the NETWORK
LED and STATUS LED.
[Setting Values: High, Middle, Low]
GPS A L
For setting the GPS function to On or Off (power
on/off).
[Setting Values: On, ROff]
Memo :
When [A/V Set] B [Video Set] B [SDI OUT1
0
Res.] is set to "1080p", configuring [System] B
[GPS] to "On" changes the setting to "1080i".
Language
Switches between languages in the menu screen.
[Setting Values: REnglish, Français, Español] (U
model)
[Setting Values: REnglish, Français, Deutsch,
Italiano, Español, Pусский, Türkçe] (E model)
Reset All
Resets all menu settings.
Memo :
[Date/Time] and [Time Zone] cannot be reset.
0
(A P155 [ Date/Time ] )
(A P156 [ Time Zone ] )
This item is not selectable when recording in
0
Camera mode, during Clip Review, during live
streaming and in Media mode.
Date/Time
For setting the year, month, day, hour, and minute.
Memo :
The display order of the date (year, month, day)
0
follows the setting in [Display Settings] B [Date
Style]. However, the 24-hour format is used for
the hour display regardless of the [Time Style]
setting.
(A P156 [ Time Style ] )
For setting the time acquired from the GPS
0
satellite by pressing the [FOCUS ASSIST/1]
button if radio wave reception from the GPS
satellite allows for setting of the date and time.
The [USER1] button is grayed out if information
for setting the date and time cannot be acquired
from the GPS satellite. A L
When [NTP] in the Status screen (Network)
0
becomes "Synchronized", pressing the
[USER2] button reflects the NTP time.
Date Style
For setting the date display sequence for display
on the LCD monitor and viewfinder screen as well
as for time stamp recording.
Display examples of the setting values are as
follows.
DMY2: 30 Jun 2019
0
DMY1: 30-06-2019
0
MDY2: Jun 30, 2019
0
MDY1: 06-30-2019
0
YMD: 2019-06-30
0
[Setting Values: DMY2, DMY1, MDY1, MDY2,
YMD]
(Default values: MDY2 (U model), DMY1 (E
model))
155
System Menu