JVC GY-HC500E Instructions Manual page 63

1 Assign the "Face Detection" function to any
of the user buttons.
(A P46 [Assignment of Functions to User
Buttons] )
2 Focus the camera recorder on a person and
press the user button that is assigned with
"Face Detection".
When Face detection is enabled, the face
0
detection icon (q) appears.
An orange frame will appear on the face of
0
the person nearest to the center of the
screen. Blue frames will appear on the faces
of others.
Focus will be automatically adjusted for the
0
selected person.
Memo :
When the button assigned with "Face Only AF"
0
or the [Camera Function] B [Face Detection] B
[Face Only AF] item is configured to "On",
"ONLY" appears to the right of the face detection
icon, and auto focus functions only when a face
is detected. When a face cannot be detected,
the camera recorder switches manual focusing.
Detection Frame (Orange)
.
Memo :
If the detection frame does not appear, make
0
sure that Auto Focus mode is selected. Also, if
[Face Detection] is set to "AF&AE", set at least
one of the iris, gain, and electronic shutter
control items to the automatic adjustment mode.
(A P64 [Adjusting the Brightness
Automatically: Automatic Brightness Adjustment
(AE) Mode] )
(A P65 [Auto Iris (Automatic Adjustment)
Mode] )
(A P66 [Automatic Gain Mode (Automatic
Gain Adjustment)] )
(A P67 [Automatic Shutter Mode (Automatic
Shutter Adjustment)] )
Selecting Specific Person from Several
Persons
1 Hold down the user button that is assigned
with "Face Detection".
The camera recorder will enter face selection
0
mode and the face detection icon (q) will
blink.
An orange frame will appear on the face of
0
the person nearest to the center of the
screen. Blue frames will appear on the faces
of others.
Detection Frame (Orange)
Detection Frame (Blue)
.
2 Select a specific person.
Use the cross-shaped button (HIJK) to
0
select a person.
An orange frame will appear on the face of
0
the selected person and focus will be
automatically adjusted.
Detection Frame (Orange)
Detection Frame (Blue)
.
3 Press the Set button (R) to confirm the
person for face detection.
Memo :
Press the [CANCEL] button to cancel the
0
selection.
A face can be selected by turning the focus ring
0
without entering the face selection mode.
The detection sensitivity and duration for
0
maintaining the current focus after losing sight
of the face can be configured in [Camera
Function] B [Face Detection] B [Sensitivity]/
[Holding Duration].
(A P116 [ Sensitivity ] )
(A P116 [ Holding Duration ] )
Adjusting the Focusing by Face Detection
Blinking
63