JVC GY-HC500E Instructions Manual page 199

o Switching from a web browser
A You will see a message indicating "It is
necessary to change the camera mode
to "Remote Edit Mode". Change the
mode." on the web browser.
It is necessary to change the camera
mode to "Remote Edit Mode".
Change the mode.
Cancel
.
B Tap (click) [Change] to switch the
camera to the Remote Edit mode.
Remote Edit Mode
Exit
.
o Switching from the camera
A "Change to Remote Edit Mode?" is
displayed on the display screen of the
camera unit.
B Select [Change] and press the Set button
(R) to switch to the Remote Edit mode.
Change to
Remote Edit Mode?
Change
Cancel
Remote Edit Mode
Exit
.
A
B
Change
A
B
Memo :
When the menu or status is displayed,
0
display of the confirmation screen will
be put on hold.
If the menu is displayed on the camera
0
recorder, close the menu.
If the status is displayed on the camera
0
recorder, close the status display.
Pressing the Set button (R) on the
0
camera recorder while in the Remote
Edit Mode ends the Remote Edit Mode
forcibly and switches to the Camera
mode.
When FTP upload via the camera unit
0
is currently in progress, switching to the
Remote Edit mode is disabled.
4 Select the Upload mode.
Select the [Upload] tab.
5 Select the clip you want to upload.
A list of the recorded clips appears on the
0
[Clip List] screen.
Tap (click) the clip you want to upload to
0
select it.
Clips being selected are indicated by a check
0
mark.
Memo :
You can switch the displayed slot using the [Slot
0
A] and [Slot B] tabs. The [Slot EXT] tab appears
when [System] is configured to "4K EXT (SSD)".
You can use the [J-30] or [K+30] tab to jump to
0
the previous or next 30 clips on the list.
6 Select the upload operation.
Tap (click) the [Actions] button.
.
Uploading a Recording Clip via a Web Browser
4
6
5
199