Programmable Menu Entry - Amana Menumaster JetWave lll Owner's Manual

ON
MENU
PRE-
STANDBY
A B C
HEAT

Programmable Menu Entry

Oven contains 3 programmable menus with 8
programmable number pads. Program
programmable number pads to form menus. To
set programmable pads, see Programming Pads
(1–8) section.
To prevent personal injury, handle
utensils, racks, and door with
care. Utensils, racks, and door
may become hot during operation.
Operating Programmable Menu Items
1. Verify oven shows "READY" in display.
• If oven display shows "STANDBY", press
ON/STANDBY pad.
• If "R" in "READY" is not flashing, open and
close oven door.
• Preheat temperature and "PREHEAT"
appear in display if oven is in preheat
mode.
2. Close oven door. "R" in "READY" flashes.
Preheat temperature and "PREHEAT" appear
in display if oven is in preheat mode.
MENU A READY
Current Menu
Status
3. Press MENU A B C pad to select
programmable menu.
4. Press numbered pad ( 1–8 ) to begin cooking.
Oven display reflects programming. If pad is
not programmed, see "Programming Pads
( 1–8 )" section.
Oven stops and signals at end of cooking
sequence.
5. Remove food to avoid overcooking.
MICROWAVE CONVECTION COMBINATION
Caution
OPTION
Pause or Cancel
1. Press STOP/RESET pad or open oven
door to pause cooking sequence.
2. Press STOP/RESET pad.
Summary of Programmable Menu
1. Verify oven display shows "READY".
2. Open oven door, place food in oven,
and close oven door.
3. Select menu (A, B, or C).
4. Press numbered pad.
5. Remove food.
12
START
1
2
3
4
5
6
7
8
STOP
RESET