Installation; Install The Software; Unpack And Install The Module - National Instruments NI PXI/e-4000 Series User Manual

Datasheet
– NI PXI Express chassis
– Cabling and sensors as required for your application

Tools
– Number 1 and 2 Phillips-head screwdrivers
– 1/8 in. flathead screwdriver
– Long-nose pliers
– Wire cutter
– Wire insulation stripper

Documentation
– NI PXIe-4304/4305 and TB-4304 User Guide and Terminal Block Specifications
– NI PXIe-4304/4305 User Manual
– PXI Express chassis user manual
You can download needed documents from

Installation

Install the Software

Note
computer.
Ensure that the following software is installed before installing the PXIe-4304/4305 and
TB-4304 hardware:
1. Your application software, such as LabVIEW, LabWindows
2. NI-DAQmx—NI PXIe-4304/4305 modules were first supported in NI-DAQmx 15.1.1.
Note
Back up any applications before upgrading software or modifying the application.

Unpack and Install the Module

Remove the packaging and inspect the module. Contact NI if the module is damaged. Do not
install a damaged module.
Caution
equipment when handling or connecting to the module.
Amplicon.com
Sales: +44 (0) 1273 570 220
You must be an administrator to install NI software and devices on your
For detailed NI software version support, refer to the NI-DAQmx Readme.
The module is static sensitive. Always properly ground yourself and the
IT and Instrumentation for industry
Website: www.amplicon.com
.
ni.com/manuals
™
Email: sales@amplicon.com
™
CVI or .NET.