Install The Terminal Block - National Instruments NI PXI/e-4000 Series User Manual

Datasheet

Install the Terminal Block

Refer to Figure 5 to install the terminal block on the module while completing the following
steps:
1. Move the TB-4304 into position in front of the NI PXIe-4304/4305 and engage the
alignment feature with the guide on the associated module.
Figure 5. Installing the TB-4304 on the NI PXIe-4304/4305 Module
1 PXI Express Controller
2 PXI Express Chassis
2. Attach the TB-4304 to the NI PXIe-4304/4305 module by pushing the terminal block
straight into the module. A spring mechanism will lock in the bottom of the terminal block.
3. Tighten the mounting screw at the top of the TB-4304 to attach it to the NI PXIe-4304/4305
module.
Note
are present, all NI PXIe-4304/4305 modules and TB-4304 terminal blocks are keyed
to prevent connection between incompatible terminal blocks, modules, and/or cables.
4. Power on the chassis.
Amplicon.com
Sales: +44 (0) 1273 570 220
1
3
5
6
4
3 Mounting Screw
4 TB-4304 Terminal Block
For safety purposes and to prevent damage to equipment when high voltages
IT and Instrumentation for industry
Website: www.amplicon.com
2
5 NI PXIe-4304/4305 Module
6 Alignment Feature
Email: sales@amplicon.com