Table of Contents
Advertisement
Datasheet
3.
Click Start to test device functions, or Help for operating instructions.
To troubleshoot errors, refer to the NI-DAQmx Help, or go to
Take an NI-DAQmx Measurement
NI-DAQmx Channels and Tasks
Refer to the NI-DAQmx Help for complete information about channels and tasks.
Use the DAQ Assistant to configure virtual channels and tasks in MAX or in your application.
Configure a Task Using the DAQ Assistant in MAX
Complete the following steps to create a task using the DAQ Assistant in MAX:
1.
In MAX, right-click Data Neighborhood and select Create New to open the DAQ
Assistant.
2.
Select NI-DAQmx Task and click Next.
3.
Select Acquire Signals.
4.
Select the analog input, and the measurement type, such as voltage.
5.
Select the physical channel(s) to use and click Next.
6.
Name the task and click Finish.
7.
Configure the individual channel settings. Each physical channel you assign to a task
receives a virtual channel name. To modify the input range or other settings, select the
channel. Click Details for physical channel information. Configure the timing and
triggering for your task. Click Run.
Amplicon.com
Sales:
+44 (0) 1273 570 220
IT and Instrumentation for industry
Website:
www.amplicon.com
ni.com/support
Email:
sales@amplicon.com
.
Advertisement
Table of Contents
