Advertisement
Verifying the Installation
© National Instruments Corporation
7.
Screw the front panel of the module to the front panel mounting rail of
the chassis.
8.
Visually verify the installation. Make sure the module is not touching
other modules or components and is fully inserted into the slot.
9.
Plug in and power on the chassis.
The NI PXI-6682 Series module is now installed.
During the first boot following the software and hardware installation
of the NI PXI-6682 Series module, Windows detects the device and
associates it with the NI-Sync driver software.
3
NI PXI-6682 Series Installation Guide
Advertisement
