Assembly - Hyundai HTDT5075-A1 Instructions Manual

4.ASSEMBLY

4.1 HANDLE ASSEMBLY
- Place the lower handle on the machine.
- First screw the handle with the two bolts and nuts provided and then with the provided two bolts and
knobs.
- Install the upper handle on the lower handle. Secure it with the provided knobs and nuts provided.
You can secure the cables to the handle with the tabs provided.
4.2 CUTTING HEIGHT AJUSTMENT
There are 8 height-of-cut positions. To select the desired height of cut, grasp the lever and move it forward or
back.
12