Table of Contents
Advertisement
Assembly
Handle assembly
1. Adjust the lower handle to the correct position for comfortable height, by aligning
the line on the mower body with one of the three lines on the end of the lower
handle. Fit the quick clips through the lower handle, and tighten (See Fig. 1).
Lines on the mower body
WARNING! The line on the mower body must be aligned with one of the
lines on the lower handle. And, the same line must be used for both sides
of the unit.
2. Place the upper handle over the upper ends of the lower handle. Align the holes.
Use the two sets of upper handle clips to secure (See Fig. 2).
Fig. 1
Fig. 2
Line on the lower handle
21
Advertisement
Table of Contents
