Table of Contents
Advertisement
Changing the Oil
Have a container ready to catch the oil and remove the drain plug. We should incline machine to make
sure all the oil could be go out. Once the oil has been emptied, replace the drain plug making sure that
the washer is in place and wipe clean any spillages.
Refill with SAE30 oil. Do not overfill.
Start the engine and allow it to run briefly. Stop the engine, wait one minute and check the oil level. Top up if
necessary.
Spark Plug
Once the engine has cooled, remove the spark plug. Clean the plug with a wire brush. Using a feeler
gauge, set the gap to 0.7-0.8mm. Refit the spark plug taking care not to over tighten.
Air Filter
Unclip the air filter cover and remove the sponge filter element. To avoid objects falling into the air intake,
replace the air filer cover.
Advertisement
Table of Contents
