Hyundai HTDT511RP Instructions Manual page 7

ASSEMBLY
Handle
Unfold the handle carefully so as not to pinch or damage the control cables.
1. Remove the screws and nuts, and then screw the lower part of the handle
onto the machine with the same screws and nuts.
2. Lift the top of the handle on the bottom handle and tighten both knobs.
Mount the front wheel
Assemble the front wheel and bracket as below picture shown:
Instruction for grass bag assembly
Before using the grass catcher, the side discharge must be removed.
Pull plastic loops over basket rods.
Open the flap then Install the grass catcher on the hook on the rear of the tool. Release the flap.
Disassemble the grass catcher
Lift the flap and remove the grass catcher.
Side discharge
Before using the side grass discharge, the grass collection basket removed.
- Unlock the flap of the side discharge
- Lift the cover.
- Hook the side discharge. Release the flap.
Mulching kit
Before using the mulching kit, the lateral discharge must be removed.
Assembly
- Remove the grass catcher if installed.
- Lift the flap.
- Fully insert the mulching kit at the back of the tool.