Tar River BDR 210 Original User Manual page 50

Attention! In the case of bolted joints fixing protective apron to metal cover, tighten the
bolted joints according to Table 3.
8) STEP IX
•
Disconnect the milled connector from the scythe-connector (For models with hydraulic
cylinder) (Fig. 37 item 2),
•
Unscrew the mounting bolts fixing the scythe-connector to the main frame (Fig. 37,
item 1) and the scythe-connector remove tie rod-knife from the machine.
Figure 37 Cover assembly – STEP IX
50