Tar River BDR 210 Original User Manual page 3

Manufacturer guarantees the efficient operation of the machine, providing it is being used in accordance
with the technical and operating conditions specified in this USER MANUAL.
Any faults revealed during the warranty period will be repaired by the Warranty Service.
Expiration date of the warranty period is specified in the WARRANTY CARD.
Machine parts and components, which are subject to wear in normal operating conditions, are not covered
by the warranty, regardless of the warranty period.
Warranty Service covers only instances such as: mechanical damages not
caused by a fault of the user, production defects, etc.
The group of elements includes, among others, the following parts/components:
• cutting blades,
• protective aprons,
• bearings.
In the event of damages resulting from:
• mechanical destruction caused by a fault of the user or a traffic accident,
• improper use, adjustment and maintenance, use of the machine for a purpose other than intended,
• use of a damaged machine
• repairs conducted by unauthorized persons, improper repairs,
• arbitrary changes and modifications of the machine structure,
the user's rights to Warranty Service may become invalid.
The user is obliged to immediately report any noticed
damages of paint coat or spots of corrosion, and order repairs regardless
whether or not the damages are covered by the Warranty. Warranty conditions are specified
in detail in the WARRANTY CARD attached to the purchased machine.
ATTENTION!
You must demand from the dealer to properly fill out the Warranty Card. For example,
if the date of sale or the stamp of a dealer are missing, you risk that your complaints
will not be considered valid
ATTENTION!
After a few hours of the machine operation, check the tension of all V-belts.
If their play is too large, tighten them.
3