Tar River BDR 210 Original User Manual page 20

Figure 4 Proper transport position for 2.10m mowers
Closing the cylinder for Eco CUT 210 mower for transport is shown in the figure below.
Lock pin - Pos. 1 should lock into the cylinder handle (lower the mower until the pin is completely locked).
The ball valve lever should be moved to the closed position - Pos. A.
However, for operation, the valve lever should be moved to the open position - Pos. B, and open the lock
with the cable until the lock is released.
Pos. 1
Pos. A
Pos. B
20