Operation And Maintenance - Tar River BDR 210 Original User Manual

7.

Operation and maintenance

All the machine operations can be performed by the operator of the vehicle, to which the machine is
attached, providing that he/she has proper authorization to operate this vehicle.
After disconnecting the machine from a vehicle, it should be stored under shelter on a flat and
hard surface, supported on its foot.
Before connecting the machine to a tractor, the operator must always check the condition of the machine
and prepare it for commissioning. To do so, he/she should:
• Read carefully this manual and follow the guidelines contained herein,
• Learn and understand the operation of the machine,
• Perform visual inspection of all elements of the machine, looking for any mechanical damage,
• Lubricate the machine in accordance with the recommendations,
• Check the mechanical condition of the pins in the hitch system, and of the cotter pins.
• Check oil level in the gearbox,
• Check tension of the V-belts,
• Check condition of the bolted joints,
• Check condition of the cutting blades.
Use only the original spare parts provided by the distributor, to guarantee safe and reliable
operation of the machine. The use of unoriginal spare parts or parts, which have been repaired,
will void the warranty.
If all the above listed steps have been performed, and the mechanical condition of the machine does not
raise any doubts, it can be connected to the tractor.
Aggregating of the machine with the tractor is shown in paragraph 6.2 Aggregating – connecting the mower.
23