Transport Position - Tar River BDR 210 Original User Manual

Figure 3 Aggregating – connecting the mower
In order to connect the mower to the tractor:
1. On the pins (Fig. 8, item1) of the suspension frame, fit the tractor's lower connectors (first left, then
right), and secure them with linchpins.
2. Insert the top connector's tip between the yoke plates, using the holes (Fig. 8, item 2), then connect
with a pin and secure with a linchpin.
3. Raise the mower to take the weight off the support foot.
4. Raise the support foot and secure it with a cotter pin.
5. Connect the chain to the transportation hitch or its bracket.
Adjust length of the articulated telescopic shaft to the tractor, according to the shaft's instructions.
6.3.

Transport position

For the mowers transportation, it should be set in the transportation position.
Articulated telescopic shaft must be detached from both, the tractor and the mower.
18