For mower models with hydraulic cylinder 2.10m:
1.
Park the tractor and mower on a flat, even surface,
2. Remove the securing element from the upper pivot of the suspension frame,
3. Raise the mower with a hydraulic cylinder of the tractor, so that the sliding discs do not
rest on the ground,
4. Raise the support foot to the upper position, and secure with a cotter pin,
5. Manually place the mower in transportation position, so the interlock pin is inserted into
the hole in clevis (rope must be loose) (Fig. 11A),
6. Bring the cylinder to transportation position, until the cylinder lock gets triggered (Fig.
13A). Transport position is shown in the Figure 13.
1) transport position 2) working
position
19