Page 3
Tar River service parts, and the necessary tools and equipment to handle all your needs. Use only genuine Tar River service parts. Substitute parts will void the warranty and may not meet standards required for safe and satisfactory operation.
Easy belt tension adjustment • Powder coat paint • Category 1 hitch • Anti-scalp roller is standard for the BFM-507 • An optional anti-scalp roller kit is available for the BFM-505 & BFM-506 • BFM-505 BFM-506 BFM-507 Weight 581 lbs. 625 lbs.
BFM-505, 506, 507 Finish Mower Important Safety Information Safety It is important that you read the entire manual and to become familiar with this product before you begin using it. This product is designed for certain applications only. The manufacturer cannot be responsible for issues arising from modification.
BFM-505, 506, 507 Finish Mower Important Safety Information General Safety Guidelines Safety of the operator is one of the main concerns in designing and developing a new piece of equipment. Designers and manufacturers build in as many safety features as possible. However, every year many accidents occur which could have been avoided by a few seconds of thought and a more careful approach to handling equipment.
BFM-505, 506, 507 Finish Mower Important Safety Information How to install Safety Signs: Be sure that the installation area is clean and dry. • Decide on the exact position before you remove the backing paper. • Remove the smallest portion of the split backing paper.
BFM-505, 506, 507 Finish Mower Important Safety Information During Operation Children should not be allowed on the machine. • Clear the area of small children and bystanders before moving the machine. • If using a towing unit, securely attach feeder by using a hardened 3/4” pin, a metal retainer, and safety •...
BFM-505, 506, 507 Finish Mower Important Safety Information Highway and Transport Operations Adopt safe driving practices. • Keep the brake pedals latched together at all times. Never use independent braking with machine in tow • as loss of control and/or upset of unit can result.
Page 11
BFM-505, 506, 507 Finish Mower Important Safety Information Highway and Transport Operations Maneuver the tractor or towing vehicle at safe speeds. • Avoid overhead wires or other obstacles. Contact with overhead lines could cause serious injury or death. • Avoid loose fill, rocks and holes, they can be dangerous for equipment operation or movement.
BFM-505, 506, 507 Finish Mower Operating Instructions Assembly Place the wheel supports (2) on the machine frame, and tighten the four bolts (4) with washers (5) and nuts (6). Insert the four wheels (1) in the support bushings, and adjust the cut height by means of the spacers (3).
Page 13
BFM-505, 506, 507 Finish Mower Operating Instructions Assembly Cont. Place the covers (13) on the belts, tighten the handles on the frame (14) and on the gearbox support (15). Attach the PTO shield (16) by means of four screws (17) and the washers (18).
Page 14
BFM-505, 506, 507 Finish Mower Operating Instructions Warning: When attaching the BFM Series Finish Mower, Never allow anyone to stand between the BFM Series Finish Mower and the tractor. Serious injury or death can occur! Attaching the BFM Series Finish Mower Carefully read this instruction manual and the manuals of the tractor and PTO shaft manufacturer.
Page 15
BFM-505, 506, 507 Finish Mower Operating Instructions Attaching PTO Shaft Attaching to Tractor Operating Instructions Operating Instructions Before attaching the rotary tiller to the tractor, check the unit to ensure there is oil in the top and side gearbox. See Maintenance section for lubricant specifications.
Page 16
BFM-505, 506, 507 Finish Mower Operating Instructions Attaching PTO Shaft Attaching to Tractor Operating Instructions Operating Instructions Cutting Height Adjustment: The cutting height of the equipment depends on the position of the wheels. If the wheels are raised, the cutting height increases; if the wheels are lowered, the cutting height decreases.
BFM-505, 506, 507 Finish Mower Operating Instructions Attaching PTO Shaft Attaching to Tractor Operating Instructions Maintenance Maintenance: Maintenance is crucial for the working life and efficiency of any agricultural equipment. If the equipment is properly maintained and operated, a long working life and operator safety are assured.
Page 18
BFM-505, 506, 507 Finish Mower Operating Instructions Attaching PTO Shaft Attaching to Tractor Operating Instructions Maintenance Every 20 working hours Lubricate the pulley support bearing (C ). Every 30 working hours Check belt tensioning. Every 40 working hours Lubricate the wheel supports (A).
BFM-505, 506, 507 Finish Mower Operating Instructions Attaching PTO Shaft Attaching to Tractor Operating Instructions Trouble Shooting Problem Possible Cause Solution Operate PTO at 540 RPM Slow blade tip speed Replace with new OEM blades Worn blade tips Sharpen, balance old blades or replace with...
Page 20
BFM-505, 506, 507 Finish Mower Operating Instructions Attaching PTO Shaft Attaching to Tractor Operating Instructions Trouble Shooting Problem Possible Cause Solution Damaged belt Replace with OEM belt. Inspect all pulley grooves for rust, paint or oth- Belt rollover Foreign material in pulley groove er foreign material.
BFM-505, 506, 507 Finish Mower Notes: This chart is an approximate estimate of torque values. Always tighten hardware to these values unless a different torque value or tightening procedure is listed for a specific application. Fasteners must always be replaced with the same grade as specified in the manual.
BFM-505, 506, 507 Finish Mower Warranty LIMITED WARRANTY Belco Resources Equipment warrants to the original purchaser of any new piece of machinery from Belco Re- sources Equipment, purchased from an authorized Belco Resources Equipment dealer, that the equipment be free from defects in material and workmanship for a period of one (1) year for non-commercial, state, and mu- nicipalities’...