Possible Problems And Solutions - Tar River BDR 210 Original User Manual

In the case of leaks from the hydraulic system, the damaged parts and
components must be replaced to avoid contamination of the environment.
Hydraulic hoses, regardless of their external condition, must be replaced
after 5 years.
7.6.

Possible problems and solutions

Table 4 Possible problems and solutions
Problem symptoms
Increased vibration of
mower
Bad cutting and clogging
of the cutting unit
V-belts slippage
During normal operation
the cutting unit leans
back, due to the action of
the break-back device
Problem cause
Unevenly worn out or
damaged parts of cutting unit
Dull or damaged blades
Poorly tensioned belts
Belts are wet
Belts are worn out
Belts of unequal length
Poorly tightened or damaged
spring in the break-back
device
Local bumps, e.g. hardened
molehills
Possible solution
Units with worn out elements replace
with new complete sets
Replace dull or damaged blades with
new complete sets
Blades dull on one side only install on
the disc with the opposite direction of
Check and adjust the belts tension
Avoid mowing when it's raining
Replace with new complete sets of
belts
Within one set of belts, there should
be belts made by one manufacturer
and bearing the same dimension
Check and adjust the spring tension;
replace if damaged
Reduce speed, and tilt the cutting unit
backwards
28