Delivery Set; Technical Specifications - Maxwell MW-1160 Manual Instruction

ENGLISH
Recipe Recommended
attachments
Bread
crumbs
Hard cheese
Meat
Nuts
Note: all data in this table are given as recommendations.
CLEANING
Attention! The blades of the chopping
knife (7) are very sharp and may be dangerous.
Handle the chopping knife (7) very carefully!
• Unplug the unit before cleaning.
• Remove the attachments. Use a slightly
damp cloth to clean the motor unit (2) and
the gears (5, 8), then wipe them dry.
• After processing salty or sour products, it
is necessary to rinse the blender attach-
ment (1) or the chopping knife (7) with water
immediately.
• While possessing products with strong
dyeing properties (for instance, carrot or
beetroot) the attachments and bowls can
get colored, wipe the attachments and the
bowls with a cloth dampened in vegetable
oil; after that wash the attachments and
bowls with a neutral detergent.
Wash the attachments that contacted prod-
•
ucts with warm water and a neutral deter-
gent and dry them thoroughly after use.
Wash the whisk attachment (9) all over and
wash only the lower part of the blender
attachment (1).
Do not immerse the motor unit (2) and the
•
gears (5, 8) into any liquids, do not wash
Weight, Cooking method
amount
of products
50 g Cut some stale bread and put
it into the chopper bowl, chop
to the desired consistency.
100 g Cut cheese into 1 x 1 cm
cubes and put it into the
chopper bowl, chop to the
desired consistency.
450 g Cut meat into small cubes
and put it into the chopper
bowl, chop to the desired
consistency.
200 g Shell nuts, put them into the
chopper bowl and chop to the
desired consistency.
them under water jet or in a dishwashing
machine.
STORAGE
Clean and dry the unit thoroughly before tak-
•
ing it away for long storage.
• Do not wind the power cord around the
motor unit (2).
• Keep the blender set in a dry cool place
out of reach of children and disabled per-
sons.

DELIVERY SET

Motor unit – 1 pc.
Blender attachment – 1 pc.
Whisk gear – 1 pc.
Whisk attachment – 1 pc.
Geared lid – 1 pc.
Chopping knife – 1 pc.
Chopper bowl – 1 pc.
Сup – 1 pc.
Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50-60 Hz
Rated input power: 200 W
Max. power 800 W
14
Approximate
time
of readiness
30 sec.
30 sec.
10 sec.
30 sec.