Safety Precautions - Maxwell MW-1160 Manual Instruction

ENGLISH
BLENDER SET MW-1160
The blender is included into the blender set
and intended for whisking, mixing, chopping
and combined processing of liquid and solid
products.
DESCRIPTION
Detachable blender attachment
1.
Motor unit
2.
On button
3.
Attachment installation place
4.
Chopper geared lid
5.
Chopper bowl
6.
Chopping knife
7.
Whisk attachment gear
8.
Whisk attachment
9.
Cup
10.
ATTENTION!
For additional protection it is reasonable to
install a residual current device (RCD) with
nominal operation current not exceeding
30 mA. To install an RCD contact a specialist.

SAFETY PRECAUTIONS

Before using the blender set, read this instruc-
tion carefully. Keep these instructions for fur-
ther reference. Use the blender set for its
intended purpose only as specified in this
manual.
Mishandling the unit may lead to its breakage
and cause harm to the user or damage to his/
her property.
• Before connecting the unit to the mains,
make sure that the voltage specified on
the unit corresponds to your home mains
voltage.
Do not use the unit outdoors.
•
Do not use the unit near hot surfaces (such
•
as gas or electric stove, oven).
• Provide that the power cord does not touch
sharp edges of furniture and hot surfaces.
• Do not touch the motor unit body, the power
cord and the plug with wet hands.
To avoid risk of electric shock or fire, do
•
not immerse the unit body, the power cord
and the power plug into water or any other
liquids.
If the unit is dropped into water:
•
do not touch the water;
–
unplug the unit immediately, only after
–
that you may take the unit out of water;
apply to an authorized service center for
–
testing or repairing the unit.
Before using the unit for the first time, thor-
•
oughly wash all the removable attachments
and containers that will contact food.
Use only the attachments supplied with the
•
unit.
• Before using the unit, make sure that the
attachments are set and fixed properly.
• It is not allowed to switch the unit on without
attachments and foodstuffs for processing.
• Never leave the unit connected to the mains
unattended.
Always unplug the unit before changing the
•
attachments and after using it.
Place the chopper bowl on a flat stable sur-
•
face.
Foodstuffs should be put into the chopper
•
bowl before the unit is switched on.
• Cool down hot foodstuffs before putting
them into the measuring cup or the chop-
per bowl.
• Do not overfill the chopper bowl with food
and watch the level of poured liquids.
If rotation of the chopping knife is hindered
•
during the operation of the chopper, unplug
the unit and carefully remove foodstuffs that
prevent blade rotation.
Remove foodstuffs and pour out liquids from
•
the chopper bowl only after complete stop of
the chopping knife.
• The cutting edges of the chopping knife and
of the blender attachment are very sharp
and dangerous. Handle these attachments
very carefully!
Do not touch the rotating parts of the unit.
•
Do not let hair or free hanging clothes get
into the rotation area of the blender attach-
ment knife or whisk.
To unplug the unit, do not pull the power
•
cord, instead take the power cord plug and
disconnect it from the mains.
• Do not place the chopper bowl and the mea-
suring cup into a microwave oven.
Do not put the attachments and the bowls in
•
a dishwashing machine.
For children safety reasons do not leave
•
polyethylene bags used as a packaging
unattended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger
of suffocation!
10