Table of Contents
Advertisement
Problem solving guide
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
To prevent unnecessary loss of temperature it is advisable not to open the door
while waiting for the appliance to be serviced.
Problem
The refrigeration appli-
ance is not getting cold
and the interior lighting
does not come on when
the appliance door is
opened.
The compressor runs
continuously.
The compressor is
switching on more fre-
quently and for longer
periods of time. The
temperature in the refri-
geration appliance is
too low.
76
Cause and remedy
The refrigeration appliance is not switched on and
the symbol is lit up on the display.
Switch the refrigeration appliance on.
The plug is not inserted in the socket correctly.
Insert the plug into the socket. If the refrigeration
appliance is switched off, will appear on the
display.
The mains fuse has tripped. There could be a fault
with the refrigeration appliance, the household elec-
trical wiring or another electrical appliance.
Contact a qualified electrician or the Miele Cus-
tomer Service Department.
This is not a fault. To save energy, the compressor
runs at a lower speed, but for longer, when less
cooling is required.
The ventilation gaps have been covered or become
too dusty.
Do not block the ventilation gaps.
Dust the ventilation gaps regularly.
The appliance doors have been opened too fre-
quently, or a large amount of fresh food has been put
in all at once for storage or freezing.
Only open the appliance doors when necessary
and for as short a time as possible.
After a while, the temperature will return to normal by
itself.
The appliance doors are not closed properly. A thick
layer of ice may have formed in the freezer section.
Close the appliance doors.
Advertisement
Table of Contents
