Sp Cnf (Setpoints 1 & 2 Configuration) - Omega DP461-S User Manual

9
Meter Function Menus
9.2.10 SP CNF (Setpoints 1 & 2 Configuration)
Refer to Section 10 for an in-depth discussion of these features.
Setpoint configuration is used to select:
• the active zone of each setpoint to above and below the setting
[SPC.1 & SPC.4]
• whether the open-collector output is on or off [SPC.2 & SPC.5]
• whether the reading compared with the setpoints is filtered or unfiltered
[SPC.3 & SPC.6]
• enabled or disabled setpoints [SPC.7]
• enabled or disabled setpoint LED displays [SPC.8]
MENU
BUTTON
MAIN MENU
"SP CNF":
9-18
MIN/MAX/MENU *
BUTTON
SUB MENU
"SPC.1=0"
"SPC.1=1"
"SPC.2=0"
"SPC.2=1"
"SPC.3=0"
"SPC.3=1"
"SPC.4=0"
"SPC.4=1"
"SPC.5=0"
"SPC.5=1"
"SPC.6=0"
"SPC.6=1"
"SPC.7=0"
"SPC.7=1"
"SPC.8=0"
"SPC.8=1"
DESCRIPTION
SETPOINTS 1 & 2 CONFIGURATIONS
Setpoint 1 Active Zone:
Above
Below
Setpoint 1 open-collector or relay output
Active ON or OFF:
On
Off
Filtered/unfiltered reading compared
with Setpoint 1 value:
Unfiltered
Filtered
Setpoint 2 Active zone:
Above
Below
Setpoint 2 open-collector or relay output
Active ON or OFF:
On
Off
Filtered/unfiltered reading compared
with Setpoint 2 value:
Unfiltered
Filtered
Setpoints 1 & 2 action:
Enabled
Disabled
Setpoint 1 & 2 LEDs action:
Enabled
Disabled