Omega DP461-S User Manual page 68

8
Scaling to
Display
Engineering
Units
Pressing the 'RESET' button one time brings you back one menu
item, pressing the 'RESET' button two times returns you to the run
mode.
WARNING! this also results in a hard reset of your peak and valley
and setpoints.
Proceed through the flow chart below entering the values listed in
submenu 1 and 2 columns.
MENU SUBMENU 1 SUBMENU 2 DESCRIPTION
L1CNF
L2CNF
L3CNF
L4CNF
INPUT BRIDGE
RDG.CNF RDG.1=0
RDG.2=0
RDG.3=0
RDG.4=1
RDG.5=
RDG.6=
RDG.7=0
RDG SC 1.00000
RDG OF 0000000
Skip past
Skip past
Skip past
Skip past
Meter's input.
2-point scaling IN.SC.OF
Active decimal point
Normal display brightness
Leading zeros suppressed
Disregard not used
Disregard not used
External hard reset vs
only peak reset
Preset for IN.SC.OF
Preset for IN.SC.OF
8-24
continued next page