Table of Contents
Advertisement
Section 4 - Configuration
The Static Routes section allows you to define custom routes to control how
data traffic is moved around your network.
In the Features menu on the bar on the top of the page, click Static Route.
To configure IPv6 rules, click IPv6 and refer to IPv6 on page 73. To return to
the main IPv4 static routes page, click IPv4.
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the Add Route button. Click Save when you are done.
If you edit or create a rule, the following options will appear:
Name:
Enter a name for the rule.
Destination
Enter the IP address of packets that will take this route.
Network:
Mask:
Enter the subnet mask of the route.
Gateway:
Enter your next hop gateway to be taken if this route is used.
Metric:
Enter a route metric value ranging from 0 to 15. This value indicates
the cost of using this route.
Interface:
Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click Save when you are done.
D-Link DIR-1935 User Manual
Static Routes
72
Advertisement
Table of Contents
