Section 3 - Configuration
Go to Features > Static Routes to define custom routes, controlling that external data traffic from a specified IP address
should be forwarded to a specified client in the LAN behind the router.
To configure the Static Route IPv6 settings, click the IPv6 tab. Refer to Static Routes - IPv6 on page 81
Click Save at any time to save the changes you have made on this page.
If you wish to remove a rule, click
in the Edit column. If you wish to create a new rule, click the Add Rule button.
click
If you click on Edit or Add Route, the following options will appear:
Name
Enter a name for the route.
Destination Network
Enter the destination network IP address to be assigned with
a static route.
Mask
Enter the subnet mask of the destination address.
Gateway
Enter the IP address of the next hop, which is the gateway to
the remote network.
Metric
Enter a route metric value between 1 and 16. This value
indicates the cost of using this route.
Interface
Select the interface that the IP packet will use to transit out of
the router when this route is used.
D-Link G415 User Manual
Static Routes - IPv4
in the Delete column. If you wish to edit a rule,
80