Streaming Tab; Unicast Streaming - Sony SNC-WR630 User Manual

Notes
• The mask cannot be set on the viewer by clicking OK
if the camera is tilted beyond +65°.
• If you change the direction of the camera, the mask
may not cover the object properly. Ensure the Privacy
masking area is sized sufficiently beforehand.
• The color is common to every privacy mask. The color
selected last is applied.
Privacy mask setting range
The setting range of the privacy mask is limited as
follows:
Pan angle:
Tilt angle:
Notes
• The privacy mask area is a rectangle that is specified
with respect to the center of the camera image. The
privacy mask may not be set in areas close to the end
of tilt operation.
• You can set 12 privacy masks. However, up to eight
privacy masks can be displayed in the screen at one
time. When nine or more privacy masks are set, masks
will be displayed by number in ascending order.
OK/Cancel
See "Buttons common to every menu" on page 20.

Streaming Tab

Use this tab to set the items for the transmission by
unicast or multicast.

Unicast streaming

Specify the transmission port numbers of the H.264
video data and audio data to be used when Unicast is
selected from the Connection drop-down list in the
Other panel on the live viewer.
Video port number 1, 2, 3
Specify the transmission port number of the H.264 video
data. The default setting is 50000, 52000 or 54000.
Specify an even number from 1024 to 65534. Two port
numbers (the number specified here and an odd number
with 1 added to the specified number) are actually used
for video data communication and control. When
performing simultaneous multi-transmission, a different
port number will be used for every transmission, based
on the port number specified here.
The settings for Image 1, Image 2 and Image 3 apply to
Video port number 1, 2 and 3 respectively.
Audio port number
Specify the transmission port number of the audio data.
It is initially set to 56000. Specify an even number from
1024 to 65534. Three port numbers (the number
specified here and an odd number with 1 added to the
specified number) are used for audio data
communication and control. When operating multi-
transmission at the same time, a different port number
20° will be used in every transmission based on the port
number specified here.
Note
65°
Specify different numbers for the video port number and
the audio port number.
RTSP video port number 1, 2, 3
Specify the H.264 video transmission port number used
for RTSP unicast streaming. The default setting is
51000, 53000 or 55000. Specify an even number from
1024 to 65534. Two port numbers (the number specified
here and an odd number with 1 added to the specified
number) are actually used for video data communication
and control. When performing simultaneous multi-
transmission, a different port number will be used for
every transmission, based on the port number specified
here.
The settings for Image 1, Image 2 and Image 3 apply to
RTSP video port number 1, 2 and 3 respectively.
Setting the Camera Image and Audio — Video / Audio Menu
29