Monitor Image; Plug-In Free Viewer - Sony Ipela SNC-CH140 User Manual

(Run)/ (Stop Save Video)
Runs and stops Save Video. Click
to be saved.
Volume
Use the slide bar to adjust the volume for sound output
level.
When you click , the icon changes to
output from the speaker stops. To output sound from the
speaker, click again.
Microphone volume
This is displayed when Microphone (page 31) in the
Common tab of the Camera menu is set to On, and a user
with audio enabled in the User Menu accesses the
device.
Use the slide bar to adjust the microphone volume.
When you click , the icon changes to
microphone input stops. To input the microphone, click
again.
Trigger panel
The above is displayed only when Viewer mode
(page 57) is set to Full, and one or more triggers are
enabled in the Trigger menu (page 70).
The configured functions are displayed as buttons on
this panel.
Click the function button you want to use on the Trigger
panel. The selected function is activated. The selectable
functions are as follows:
• send still image files attached to an e-mail (page 21)
• send still image files to an FTP server (page 21)
• Record still image files (page 21)
• control the alarm output (page 21)
• switch the Day/Night function on/off (page 21)
• play the audio file stored in the camera (page 21)
Others panel
to open the folder
(Displayed only when the camera image is in MPEG4 or
H.264.)
You can switch between TCP and UDP (Unicast/
and the
Multicast).
Each click switches the transmission mode of the video/
audio data between TCP mode, UDP (Unicast) mode,
and UDP (Multicast) mode (page 22).

Monitor image

and the
The image shot by the camera is shown here.

Plug-in free viewer

Main viewer using Plug-in free viewer
Display sample:
Camera list Control bar
Monitor screen
Configuration of Main Viewer
19