Using The Snc Video Player - Playing Video File Recorded On Camera; Downloading The Snc Video Player; Using The Snc Video Player - Sony IPELA SNC-CS10 User Manual

Using the SNC video
player
— Playing Video File
Recorded on Camera
The supplied SNC video player allows you to play video
data recorded on the camera with your computer.
This section explains the setup and operations of the
SNC video player.
Tip
Only in SNC-CS11, the video data file includes audio
data.

Downloading the SNC video player

To download the SNC video player, click the
located on the upper part of the main viewer of the
camera.
Type the user name and password for the administrator
on the download dialog and click OK. (The factory
settings of both items are "admin".)
On the "File Download" dialog, click Save. The SNC
video player is saved in the computer.
Note
To operate the SNC video player, a special DLL file is
necessary. This file is automatically installed in the
computer when you view camera images with the
ActiveX viewer.

Using the SNC video player

1
Double-click the SNC video player downloaded
from the camera to start this application.
66
Using the SNC video player — Playing Video File Recorded on Camera
2
Click the
The Select File dialog opens.
3
Select the file you want to play.
Information boxes on the selected file are displayed
on the left side of the window as follows:
Each click on the
between "display" and "Not to display" of the file
information.
File information
Model name: Model name of the camera with
which the file is recorded.
IP address: IP address of the camera with which
the file is recorded.
Serial number: Serial number of the camera with
which the file is recorded.
Record event: Type of event used for the
recording: Sensor input or Motion detection.
Player
Date&time: Recording date and time
Movie: Video Codec
Audio: Audio Codec
Playing a video file
Click (start) to start playing from the beginning of
the selected file.
To freeze the movie temporarily, click
Click again to restart playing.
To stop playing, click
To restart playing, click
Play stops when the file is played to the end.
To play from a specified point
Move the slider bar below the image display, and the file
will play starts according to the position of the slider bar
position.
Adjusting the sound (SNC-CS11 only)
Adjust the playing sound volume by moving the
slider bar. Move it to the left end for the
minimum volume, and to the right end for the maximum
volume.
Click the
When the sound muting is on, no sound is heard even if
you move the slider bar to the right.
Saving an image
Click (capture) during playing or pause and the
captured image is displayed on a pop-up dialog. To save
the image, click Save on the dialog. You can specify the
destination to which the image is to be stored and select
the JPEG or Bitmap format.
.
(information) switches
(stop).
(start) again.
to enable/disable the sound muting.
(pause).