OPC9000 series − Instruc�on manual v1.5
5.5 Operation of multiple monitors on one OPC9
5.5.1 Quantity
Up to three monitors can be operated in parallel:
-
the integrated display of the OPC9,
-
a FullHD monitor at the DP port of the OPC9,
-
a FullHD monitor via HDBaseT.
Tip: With the help of the X-Remote
desktop onto up to 8 computers and, thanks to clearly regulated access rights,
operate it from all computers in turn.
5.5.2 Windows Display Settings
Possible display arrangements using Windows' built-in "Display settings":
a) Extend desktop to all three displays (not clone).
b) Duplicate desktop to 1 and 2 (desktop clone); monitor 3 as extended desktop.
c) Duplicate desktop to 1 and 3 (desktop clone); monitor 2 as extended desktop.
Notes:
-
You open the Windows display settings via:
Desktop -> right mouse button -> Display settings
-
The settings on the Display Settings page always refer to the screen or screens selected above.
-
The arrangement of the screens can be adjusted to the requirements by dragging and dropping.
-
Switching from one clone mode to the other (b->c or c->b) is done in a roundabout way via the triple
extended display.
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nür�ngen • Germany
®
software from ADS-TEC, you can clone a
27