Yamaha 5KM2-AE1 Service Manual page 401

EB806024
2.If the neutral indicator light fails to come on:
1.Neutral indicator light LED
Check the LED of the neutral indicator light.
G
2.Gear position switch
Refer to "CHECKING THE SWITCH".
3.Voltage
Connect the pocket tester (DC 20 V) to the
G
bulb socket coupler.
Tester (+) lead → Red/White terminal 1
Tester (–) lead → Sky blue terminal 2
Turn the main switch to "ON".
G
Check the voltage (12 V).
G
This circuit is not faulty.
CONTINUITY
CONTINUITY
MEETS
SPECIFICATION
9 - 36
SIGNAL SYSTEM
NO CONTINUITY
Replace the meter assembly.
NO CONTINUITY
Replace the gear position switch.
OUT OF SPECIFICATION
The wiring circuit from the main switch to the
bulb socket connector is faulty, repair it.
– +
ELEC