Removing The Ac Magneto; Disassembling The Recoil Starter; Checking The Ac Magneto - Yamaha 5KM2-AE1 Service Manual

RECOIL STARTER AND AC MAGNETO

REMOVING THE AC MAGNETO

1.Remove:
Starter pulley 1
G
NOTE:
Use the rotor holding tool 2 to hold the starter
pulley.
Rotor holding tool:
P/N. YU-01235, 90890-01235
2.Remove:
Crankcase cover (left)
G
Gasket
G
Dowel pins
G
NOTE:
Working in a crisscross pattern, loosen each
bolt 1/4 of a turn. Remove them after all of
them are loosened.
3.Remove:
CDI rotor 1
G
NOTE:
Use the flywheel puller 2.
Flywheel puller:
P/N. YM-01404, 90890-01404

DISASSEMBLING THE RECOIL STARTER

1.Remove:
Cap 1
G
Starter handle 2
G
NOTE:
Before untying the knot 3 above the starter
handle, make a knot 4 in the rope so that the
rope is not pulled into the case.

CHECKING THE AC MAGNETO

1.Check:
Starter coil
G
Pickup coil
G
Damage → Replace.
4 - 41
ENG