Locking And Unlocking The Device; Activating The Device Lock; Opening The Device Lock - Sartorius Picus 2 Operating Instructions Manual

Operation
40 Picus 2 Operating Instructions
®
Aspirate the liquid. To do this, use one of the following options:
t
Press and hold the operating button. The aspiration speed is
t
constant.
Turn the scrollwheel anti-clockwise. The further the scrollwheel is
t
turned, the higher the aspiration speed.
To interrupt the process: release the operating button or the scrollwheel.
t
To switch to dispensing: turn the scrollwheel briefly clockwise.
t
The display arrow points down.
y
Dispensing liquids
Procedure
Dispense the liquid. To do this, use one of the following options:
t
Press and hold the operating button. The dispensing speed is
t
constant.
Turn the scrollwheel clockwise. The further the scrollwheel is turned,
t
the higher the dispensing speed.
When the entire volume has been dispensed: press the operating
t
button.
The message "Double-click to empty?" is displayed.
y
To aspirate liquid again: press the [NO] softkey.
t
To empty the tip: press the operating button.
t
To eject the tip: press the electronic tip ejection.
t
8.2

Locking and Unlocking the Device

The device can be locked to prevent further use. This function can be used
when an error has occurred in the device, for example, or the device has
become contaminated.
8.2.1

Activating the Device Lock

Procedure
Open the main menu.
t
Open the "Settings" sub-menu.
t
Select the "Pip. Lock" menu item and confirm.
t
The display shows "Lock pipette"?
y
Confirm the lock with the [YES] softkey.
t
The device is locked.
y
8.2.2

Opening the Device Lock

Procedure
Press the [UNLOCK] softkey.
t
If password protection is activated: enter the admin password.
t
The device is unlocked and the device is ready for use.
y