Long Live The Logiflex; Lubrication And Hydraulic Oil; Oil Change - logitrans LOGIFLEX ELF Manual

6.0 Long live the Logiflex

Regular inspection and the replacement of worn or defective parts in good time will
prolong the life of the Logiflex.
"Prevention is better than repair", therefore ensure:
• Correct usage
• Regular cleaning
• Periodic safety and service inspection

6.1 Lubrication and hydraulic oil

Under normal operation conditions the Logiflex requires no
lubrication.
All ball bearings are sealed and lubricated for life, and moving parts
have self-lubricating bearings or are treated with grease. The hydraulic system is
filled with hydraulic oil of viscosity class ISO VG 15.
An additive is added to the oil. The concentrate reduces friction and wear and pro-
tects against corrosion.
Pre-mixed hydraulic oil with additive is available from the dealer. The oil is suitable
for use in the temperature range -10 to +50° C. A thinner oil is recommended for
temperatures lower than -10° C (if necessary, contact your dealer).

6.2 Oil change

Draining the oil:
1. Bring the unloaded forks down to the lowest position.
2. Most of the oil can be drained by loosening the hydraulic hose union and briefly
activating the hydraulic pump with the switch.
3. The remaining oil can be drained from the oil tank by taking off the twelve clips
on the pump and removing the tank.
Oil filling:
4. Fill oil through the filling hole on the tank.
5. Oil quantity:
6. Refit the filling cap and bleed the system (6.3).
ELF 920 & ELFS 890
ELF 1200 - ELF 1600 & ELFS 1170 - ELFS 1570
ELF 1910 - ELF 2850 & ELFS 1880 - ELFS 2820
ELF 3300 & ELFS 3270
Tel. +45 76 88 16 00 . info@logitrans.com . www.logitrans.com
Approx 1,5 Liter
Approx 3,0 Liter
Approx 4,0 Liter
Approx 4,5 Liter
S612 11