Advantech B+B SmartWorx SmartStart Start Manual page 15

3. Restoring and Backing up the Router Configuration
After you reset the router, the current configuration is overwritten by the default settings.
We recommend that you back up the router configuration before resetting the device. Refer to
the Configuration manual for more information.
When the PWR LED starts blinking, it is possible to restore the default configuration of the
router by pressing the RST button on the rear panel. After pressing this button, the default
configuration is restored and then the router reboots (green LED will be on).
After logging on to the device for the first time, we strongly recommend to change
the default password due to security reasons. Simultaneously, you will gain ac-
cess to all functions of the router.
Documentation
User Manual and Configuration Manual for the router can be found on the company web
site www.bb-smartcellular.eu/download. Please, use the following login information:
Username: smartrouters
Password: smartrouters
We declare that the SmartFlex SR300 (versions with WiFi only), SR303, SR305,
SR306 and SR307 are in compliance with the essential requirements and other rel-
evant provisions of direction 1995/5/EC.
SmartFlex SR300 versions without WiFi are in compliance with the essential require-
ments and other relevant provisions of directions 2014/30/EU and 2014/35/EU.
The Declaration of Conformity is available on the company website or from technical support,
on request.
14
QSG issued in CZ, January 25, 2017
SmartFlex