Scope Of Delivery / Serial Accessories; Mains Connection; Battery Operation; Initial Commissioning - KERN EOB B Series Operating Manual

6.2.1 Scope of delivery / serial accessories

• Platform and display unit, see chap. 2
• Mains adapter
• 4 x adjustable feet
• Wall fixture (with fixing screws)
• Operating manual

6.3 Mains connection

Select a country-specific power plug and insert it in the power unit.
Check, whether the voltage acceptance on the scales is set correctly.
Do not connect the scales to the power grid unless the information on
the scales (sticker) matches the local mains voltage.
Only use KERN original mains adapter. Using other makes requires
consent by KERN.
Important:
Before starting your weighing balance, check the mains cable for

damage.
Ensure that the power unit does not come into contact with liquids.

Ensure access to power plug at all times.


6.4 Battery operation

On the rear side of the display unit remove the battery cover and connect 4 x 1.5V
mignon cells. Reinsert the battery cover.
In order to save the battery, the balance switches automatically off after 3 minutes
without weighing. Additional switch-off times can be set in the menu (function
"A.OFF").
If the batteries are depleted, the battery symbol
Switch-off balance and replace batteries at once.
If the balance is not used for a longer time, take out the batteries and store them
separately. Leaking battery liquid could damage the balance.

6.5 Initial Commissioning

In order to obtain exact results with the electronic balances, your balance must have
reached the operating temperature (see warming up time chap. During this warming
up time the balance must be connected to the power supply (mains, accumulator or
battery).
The accuracy of the balance depends on the local acceleration of gravity.
Strictly observe hints in chapter Adjustment.
EOB / EOE / EOS -BA-e-1741
is displayed.
17