Table of Contents
Advertisement
6.4
Accessories
We recommend a parking stand into which either
the front or rear wheel can be inserted securely for
pedelecs which do not have a kickstand. The
following accessories are recommended:
Description
FAMILIANO XRACK RAIL
FAMILIANO
SITZKISSEN+LENKER
FAMILIANO FRONT GT
IRACK
FAMILIANO FRONT KORB
KLEIN
FAMILIANO L HECK KORB
GROSS
FAMILIANO C+L
FUSSRASTEN KLEIN
FAMILIANO L TRITTBLECH
FAMILIANO L GT RAHMEN
Table 55: Accessories
*System components are matched to the pannier
rack and provide sufficient stability due to special
transmission of force.
**System components are matched to the drive
system.
6.4.1
Child seat
CAUTION
!
Crash caused by improper handling
When using child seats, the pedelec's handling
characteristics and stability change considerably.
This can cause a loss of control, a crash and
injuries.
You should practice how to use the child seat
safely before using the pedelec in public
spaces.
Risk of crushing due to exposed springs
The child may crush his/her fingers on exposed
springs or open mechanical parts of the saddle or
the seat post.
Never install saddles with exposed springs if a
child seat is being used.
Never install seat posts with suspension with
open mechanical parts or exposed springs if a
child seat is being used.
MY20B01-41_1.0_06.04.2020
Article number
08949-090
08949-100
08949-110
08949-120
08949-130
08949-140
08949-150
08949-160
Notice
Observe the legal regulations on the use of
child seats.
Observe the operating and safety notes for the
child seat system.
Never exceed the total weight of the pedelec.
The specialist dealer will advise you on choosing
a suitable child seat system for the child and the
pedelec.
The specialist dealer must install the child seat the
first time to ensure that it is safely fitted.
When installing a child seat, the specialist dealer
makes sure that the seat and the fastening
mechanism for the seat are suitable for the
pedelec and that all components are installed and
firmly fastened. They will also ensure that shift
cables, brake cables, hydraulic and electrical
cables are adjusted as necessary, the rider's
freedom of movement is not restricted and the
pedelec's permitted total weight is not exceeded.
The specialist dealer will provide instruction on
how to handle the pedelec and the child seat.
The specialist dealer will advise you on choosing
a suitable child seat system for the child and the
pedelec.
The specialist dealer must install the child seat the
first time to ensure that it is safely fitted.
When installing a child seat, the specialist dealer
makes sure that the seat and the fastening
mechanism for the seat are suitable for the
pedelec and that all components are installed and
firmly fastened. They will also ensure that shift
cables, brake cables, hydraulic and electrical
cables are adjusted as necessary, the rider's
freedom of movement is not restricted and the
pedelec's permitted total weight is not exceeded.
The specialist dealer will provide instruction on
how to handle the pedelec and the child seat.
6.4.2
Bicycle trailers
CAUTION
!
Operation
64
Advertisement
Table of Contents
