IoT (Internet of Things) feature allows you to build connections between your video recorder and
IoT devices, including access control and alarm devices. Video recorder will receive alarms from
connected IoT devices. You can configure linkage actions like triggering recording and full screen
monitoring, when IoT alarm occurs.
Note
This chapter is only available for certain models.
7.1 Add an IoT Device
Note
Maximum number of IoT channel is the half of maximum network camera number of your video
recorder.
7.1.1 Add an Access Control Device
Add Hikvision alarm host and video intercom devices to receive alarms. You can configure linkage
actions like triggering recording and full screen monitoring, when an alarm occurs.
Before You Start
Install access control devices. Ensure network communication between access control devices and
video recorder is well.
Steps
1. Go to Business Application → IoT → Access Control → Device Management.
2. Click Add.
Network Video Recorder User Manual
Chapter 7 IoT
Figure 7-1 Access Control
119