Configure Email - HIKVISION DS-8600NXI-I8/S Series User Manual

Note
You can configure SNMP v2 and SNMP v3 parameters via web browser in Configuration →
System → Advanced Settings → SNMP.

12.5 Configure Email

The system can be configured to send an e-mail notification to all designated users when a
specified event occurs such as when an alarm or motion event is detected, or the administrator
password is changed, etc.
Before You Start
The device must be connected to a local area network (LAN) that contains an SMTP mail server.
The network must also be connected to either an intranet or the Internet depending on the
location of the e-mail accounts to which you want to send notifications.
Steps
1. Go to System → Network → Advanced → Email.
2. Configure the email settings.
Enable Server Authentication
Check to enable the function if the SMTP server requires user authentication and enter the
Network Video Recorder User Manual
Figure 12-5 Email Settings
152