Configure Auto-Switch Of Cameras - HIKVISION iDS-6700NXI-I/FA Series User Manual

Select the display mode for Live View, e.g., 2*2, 1*5, etc.
Dwell Time
The time in seconds to wait between switching of cameras when using auto-switch in Live
View.
Enable Audio Output
Enable/disable audio output for the selected video output.
Volume
Adjust the Live View volume, playback and two-way audio for the selected output interface.
Event Output
Select the output to show event video.
Full Screen Monitoring Dwell Time
Set the time in seconds to show alarm event screen.
3. Click OK.

3.3 Configure Auto-Switch of Cameras

You can set the auto-switch of cameras to play in different display modes.
Steps
1. Go to System → Live View → General.
2. Set Video Output Interface, Live View Mode, and Dwell Time.
Video Output Interface
Select the video output interface.
Live View Mode
Select the display mode for live view, e.g., 2*2, 1*5, etc.
Dwell Time
The time in seconds to dwell between switching of cameras when enabling auto-switch. The
range is from 5s to 300s.
3. Go to View Settings to set the view layout.
4. Click OK to save the settings.
Network Video Recorder User Manual
27