Configure Auto-Switch Of Cameras; Configure Channel-Zero Encoding - HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series User Manual

Click
●
Click
●
Step 5 Click Apply to save the settings.

5.5 Configure Auto-Switch of Cameras

You can set the auto-switch of cameras to play in different display modes.
Step 1 Go to System > Live View > General.
Step 2 Set the video output interface, live view mode and dwell time.
Video Output Interface: Select the video output interface.
●
Live View Mode: Select the display mode for live view.
●
Dwell Time: The time in seconds to dwell between switching of cameras when enabling
●
auto-switch. The range is from 5s to 300s.
Step 3 Go to View to set the view layout.
Step 4 Click OK to save the settings.

5.6 Configure Channel-Zero Encoding

Purpose:
You can enable the channel-zero encoding when you need to get a remote view of many channels
in real time from web browser or CMS (Client Management System) software, in order to decrease
the bandwidth requirement without affecting the image quality.
Step 1 Go to System>Live View>General.
Step 2 Select the video output interface to Channel-Zero.
Step 3 Go to System>Live View>Channel-Zero.
Step 4 Check the checkbox to enable the channel-zero.
Network Video Recorder User Manual
button to start live view for all the channels.
to stop all the live view.
67