Pudu SwiftBot SWFD01 Operation Manual page 52

Settings
Basic settings
Network settings
Bluetooth
Music library
Map settings
Charging settings
Projector settings
Tray settings
Version: V1.0
51
PuduSwiftBot Operation Guide
Description
Set screen brightness, language, voice volume, music volume, key tone volume,
etc.
Set up the network connection.
The robot cannot be upgraded or perform voice interaction without a network
connection.
Please install a SIM card first if you wish to use 4G networks. Make sure that
the robot is powered off before installing or removing the SIM card.
Choose whether to enable Bluetooth.
If enabled, the devices that can be connected will be displayed on the interface.
Scan the QR code to import music for the robot to play during tasks.
Only Android phones are supported.
Create a new map or switch maps.
Choose whether to enable the Auto charging function and set the threshold and
time slot for charging.
If the auto charging function is enabled and a low battery threshold is set, when
the battery level drops below the set threshold, the robot will automatically
return to the charging pile for charging after it completes its current task or
during a cruise. After the robot is fully charged, it automatically returns to a
pickup location or departure location. The threshold ranges from 5% to 50%.
You can also set the time slot for the robot to perform Auto charging. Up to
three time slots for auto charging can be set. If it is disabled, Auto charging can
be performed throughout the day by default.
This function is only available if the user has purchased a charging pile and set
up its location during mapping. Otherwise, the robot may work improperly.
To use this function, please enable Auto charging in Advanced Settings first.
Choose whether to enable laser projector.
If the laser projector is enabled, the user can set the projection brightness, color,
and size and turn on the reference lines.
If reference lines are enabled, they will be projected to navigate the robot during
its movement.
Choose whether to enable the top tray and set the number of internaltrays.
If the top tray is disabled, it cannot be used in Food Delivery mode, Delivery
mode, and Interactive mode. The top internal tray is enabled by default.
On the Tray Settings interface, tap Delete on the first and second layers to delete
the corresponding tray. The deleted trays will not be displayed in any mode.
Operation Guide