Auto Charging; Docking Instructions - Pudu SwiftBot SWFD01 Operation Manual

Function
Third-party APIs
After-sales display in menu
Interactive function
Restore all settings

3.3 Docking Instructions

PuduSwiftBot supports three docking modes. In actual scenarios where multiple robots cooperate,
users can select any docking mode during mapping. This section only covers the description of the
three docking modes. For details about mapping, please contact our technical engineers.
Three docking modes:

One-to-one Docking mode: Each robot has its fixed pickup location (docking location).

Free Docking mode: Set multiple pickup locations (docking locations) for the robot to
dock by priority, i.e., the robot chooses the nearest pickup location for docking.

Waiting mode: Set temporary docking location. When the robot has no task and there's
no vacancy at the pickup locations (docking locations), the robot docks at the temporary
docking location. Once a vacancy appears at a pickup location (docking location), the
robot automatically goes there for docking.
Version: V1.0
54
PuduSwiftBot Operation Guide
Description
Choose whether to enable third-party APIs.
If enabled, the Calling function will be
displayed on the Settings interface. It can be
used with
third-party APIs.
Choose
information display in the menu.
If enabled, after-sales-related information will
be displayed on the About interface.
Set the winning rates for lucky draws of the
Interactive mode.
Choose whether to restore the robot to factory
settings.
Doing so will delete contents such as the
downloaded music, custom voice packets, and
maps. Please proceed with caution.
Operation Guide
PuduBeeper and
whether to enable
supports
after-sales