Pudu SwiftBot SWFD01 Operation Manual page 29

If Single-layer multi-table is enabled on the Delivery Settings interface, you can put
multiple items for different destinations on a single tray.
Step 12 After entering the destination, tap Start.
The robot arrives at the destination along the predetermined path.
For an SWFD11 robot using internaltrays in the compartment, the compartment door will be
closed automatically after tapping Start.
Step 13 After arriving at the destination, the robot issues a voice prompt. The userthen
takes the dishes following the screen display and voice prompts.
For an SWFD11 robot using trays inside the compartment, the compartment door will be
opened automatically.
Step 14 After taking the dishes, tap Done and the robot will perform its next task.
For an SWFD11 robot using original trays in the compartment, the compartment door will be
closed automatically before the robot starts the next task.

If Automatic pick up time is enabled on the Delivery Settings interface, the robot
automatically completes the task and performs the next task if Done is not tapped within
the set time after arriving at the destination.

To make any modifications during delivery (e.g., modify task, pick up in advance,
cancel all, or return), tap the screen to pause the robot before any operation. If no
operation is performed within the pause time (Auto resume time of pause), the robot will
proceed with its current task. Pause time (Auto resume time of pause) can be set on the
Delivery Settings interface.
Version: V1.0
28
PuduSwiftBot Operation Guide
Operation Guide